Consumer Units
Having a new consumer unit installed can be a big job. It is not always the case; but can cause a lot of disruption. This is usually the case in commercial properties. That’s why we work out of hours; as it gives the best options for our clients
What you must know about your new Consumer Unit.
You have made the decision to replace your old Consumer Unit, it is important to ensure that this job is completed by a competent electrician and that it is installed and compliant with BS7671.
Think of your Fuse Board as the main hub of your home – it’s the ‘thinking centre’ to all electrical aspects in your home. If the job is carried out incorrectly, your home will be in a dangerous condition and your family is then at risk from electrical harm.
Try it for free
Schedule a call.............
No registeration needed.
A2z Fire & Electrical will outline the main reasons why you may need or want your old consumer unit replacement to a new 18th Edition Consumer Unit:
- You are having some other electrical work carried out and need to comply with the regulations.
- Your old fuse board is overloaded and starting to cause problems for the remainder of the installation.
- Your wiring installation is in poor condition but you cannot afford a rewire, changing to a 18th Edition Consumer Unit will offer some protection.
Whatever the reason upgrading an old fuse board to one incorporating two residual current devices (RCDs), is a job that many people will now have to consider at some point. The reasons for a new fuse board above may have been raised by another trades person in your home such as a builder if you are having a large building project undertaken but please remember if you are considering a new fuse board to ensure that are registered with the NICEIC, NAPIT or Elecsa.
